These models are three enclosures designed to accompany a project that uses a Shelly RGBW2 device running ESPHome in order to control an AC Infinity Cloudline S3 fan.
- Basic box just holds the Shelly and molex plug used by the fan
- This is a single-color model that you can print on any machine
- LED Ring intended to use RGB LEDs to indicate fan speed
- This version needs an MMU. I used my Prusa XL with clear filament for most of the diffuser, and Jessie “quarter white” filament for the very thin face portion
- LED Bar uses 3 separate LEDs intended more as a progress bar for fan speed
- This version also needs an MMU, though you might be able to shrink the “light pipes” by 10% or so and print them separately to be glued in later.
- I have not printed this version of the model after switching my own builds to the “ring” version. It should work fine, but is untested.
You can find instructions and other helpful information about this project at github: https://github.com/ex-nerd/esphome-shelly-cloudline
If you would like to use these as a model for something else, or just grab the mockup of the Shelly for future designs, you can find the sources at Onshape:
ex-nerd
