May 20, 2025
Description
In the F-15E/EX grip the problem isn't the TDC itself, but the big shaft. I've slimmed it down to only 1mm and extended it by 3mm for more precision. Increases the range from 50% on the Y axis and 70% on the X axis to 100% on both axes.
Print as is with supports and brim on, i recommend a layer height of 0.08 or less.
WARNING: make sure layer adhesion is strong enough or/and coat the slim part in superglue to avoid it breaking inside your throttle.
Remixed from:
https://www.thingiverse.com/thing:4714041 (although most of it has been altered)
License:
Creative Commons — Attribution — Noncommercial
kbu
