Tikka T3X Tac A1 .308 Magazine , CTR, Arctic

This is a 3d printable Magazines for the Tikka T3X Tac A1, CTR and Arctic rifles.

Included are models for a 5 rnd and a 10 rnd version (with the 5 round variant being the more practical choice) which are a dircet replacement for thefactory metal 10 rnd magazines.

All you need for except for the printed part, is a part of a AK-74 Magazine spring, that has to be cut to lenght. you should be able to get either 3 5 round mags or one 10rnd and one 5 rnd Magazine from one spring. I have included pictures of my magazines springs to give you a guid of how long to cut them. you will need to bend the ends of the spings a little to fit he follower and basplate, but thats self explanatory.

it is possible that you will have to adjust the magazine holder hole a litte, but you want a snug fit to prevent the bolt from simply riding over the rounds.

Printing
You should have a pretty good calibrated printer to start with, specific settings aren't that important, as this magazine loader doesent recieve to much stress.

The bodies and the baseplate should be printed staying up, the follower and the base plate retainer lying on their side.
It may be advisable to print the tall piece with a brim or some sort of adhesive, if you have problems with bed adhesion, as they have quite a small footprint.
I printed my example with a wall count of 4, but you can make them solid
The filament i used is Esun PLA+, but it should be printale in most filament.
 

printer settings
 nozzle size  0,4mm
 layer height 0,2
 Nozzletemp  205-225 (whatever works for you)
 Bedtemp   60 (whatever works for you)
 walllinecount 4 (whatever works for you)
 supports   enabled