With this assortment system you can store all your screws, nuts, etc. You can print the boxes that you want, and if you need more later, it is easy to expand.
All expansion-parts of the assortment System you can find in this collection: Assortment System
Features of this system
The dimensions of 60 mm grid size is prefect for the Prusa MK3S - you can print in maximum a 3x4 box
Also the big boxes are very rigid.
The grid holds the boxes in place.
The boxes can be connected with M2 screws - holes and places for the nuts are printed into the box
The system is expandable through M2 screw accessories and with the snap buckle system in the walls (more to come!)
The Boxes can be stacked as you like. Also, a 1x1 on a 3x4 is possible.
There are two places for labelling (inside and outside).
You can use screws or glue to fix the grids on the surface.
The boxes have a small tolerance for better fitting.
Naming Scheme
The Parts are named after the following scheme. This scheme is also printed on the boxes.
Box
SB for Storage Box
First + second number = grid size
third + fourth number = height
fifth number = number of elements in the width
sixth number = number of elements in the depth
V1 = version
Example: SB_604523_v1_2201
The box has a grid size of 60mm and a height of 45 mm. In the width it is 2 grid modules big (120 mm) and in the depth it is 3 grid modules big (180 mm). The box is version 1 and from January 2022
Grid
AS_grid
First + second number = grid size
thirth number = number of elements in the width
fourth number = number of elements in the depth
Example: AS_grid_6034
This grid is for a grid size of 60 mm and is 3 gird modules large in the width (180 mm) and 4 grid modules large in the depth (240 mm)
List of parts
Storage Box
Box (width x depth)
Time (hr:min)
Material (in g)
1x1
2:32
23,75
1x2
4:12
39,67
1x3
5:58
55,76
1x4
7:34
71,43
2x1
4:01
39,77
2x2
6:40
64,32
2x3
9:08
88,10
2x4
11:42
112,65
3x1
5:41
56,25
3x2
9:03
88,70
3x3
12:26
121,01
3x4
15:44
153,12
4x1
7:13
72,33
4x2
11:30
113,28
4x3
15:39
153,45
Grid
Grid (width x depth)
Time (hr:min)
Material (in g)
1x1
0:27
4,24
1x2
0:51
8,01
1x3
1:14
11,68
1x4
1:37
15,36
2x2
1:34
14,96
2x3
2:17
22,00
2x4
3:00
28,82
3x3
3:19
32,01
3x4
4:21
41,92
Measurement
The uploaded model is with a grid size of 60x60 mm and a height of 45 mm. (Probably more variants in the future, if needed)
Print instructions
Recommended Print Settings
Infill: 15 %
Layer height: 0,20 mm
Supports: No
Optional hardware
For fixing the grid
this: screw 3x16 SPAX (schraubenking) - will slightly look out of the grid
smaller sidewalls, for faster prints and fewer material consumption
etc.
Updates
---
If you have any questions or improvements/suggestions do not hesitate to contact me! If you like what you see, consider following me to support my work - more to come -
Every product in the links, I bought and tested by myself. As an Amazon Associate I earn from qualifying purchases through my Amazon links. By buying through any of the links above I will earn commission at no extra cost to you.
AUGU5TO
