Ender-3 V3 KE Filament Sensor Mount (PTFE Tube)

I'm using a filament drybox so need to directly feed the extruder with a PTFE tube.

I was looking for a viable option. Tried different approches with sensor keeping in it's current place but pressure between extruder and sensor feels not right. Then found this dude's design and simply added a head and voila!

I added 2 version of head. One needs a PTFE connector which is the one I use. Other is as it is. But PTFE tube may not stay in place for this version. So you be the judge.

If you already printed the original one, simply glue this one's head to it. If not print my version of body that has M3 screws. Also if your connector is bigger then 10mm you may just glue it.

Unlike the original designer I do not have heart to move the mountains for the cable. So simply joined them with 3 two-way cables (male-to-female) and it works without any screw, welding or stuff.

Cheers!