Mini Adhesive Hook

I originally designed this simple hook to hang lights under the awning on my patio. The flat side of the hook is sized for a standard roll of 0.5" 3M VHB tape, and is very strong when printed and applied correctly.

Includes 2 sizes:

Mini_Hook_A = 30mm tall

Mini_Hook_B = 20mm tall 

Recommended print settings:

• Print in PETG plastic
• 0.2mm layer height, 0.4mm nozzle, “STRUCTURAL” mk4 preset + input shaping
• 5 perimeters
  • This forces the hook part to be entirely made of perimeters for maximum strength
• 20% gyroid infill
• No supports or brim
• Orient the model on its side to maximize strength
  • Do not print with the “back” flat side on the bed.