Sony RM-X2S Mounting Plate

A replacement mounting plate for the Sony RM-X2S steering wheel remote for vintage cars.

This is perfect for no-damage installations using adhesive. I recommend using Super Glue - Total Tape Precut Strips (affiliate link) for attaching it to your steering column without drilling into it.

Printing Instructions

• Orientation: Do not lay the mount flat. You must print this standing up as oriented in the second photo.
• Material: Print with ABS, Nylon, or PETG. PLA may suffice if you do not store the car in sunlight like I do.
• Supports: Enable standard supports- you will need to pluck them out carefully after printing. Tree supports may fail on you. Be sure your interface is appropriate.
• Use 100% infill, five walls. Enable ironing.