Cable Duct Parametric Additions

This is a sizing remix* of Leon H's "most excellent" Cable Duct Parameteric project.
https://www.printables.com/model/824381-cable-duct-parametric

To quote him, it is,
"This fully parametric cable duct is designed to help you neatly hide your nasty cables.

The cable duct consists of a base and a lid, which can either slide on from the side or simply snap on from above. The lid fits flush with the base, creating a very clean look."

Having printed and used Leon's models I found I needed some larger ducts. So, I took has Fusion 360 file, adjusted the parameters, tested, and here is the result. Leon's original work contains ducting sized for "single cable" and "multiple cables" with various lengths, 50mm, 100mm, and 200mm along with a set of various connector ducts. Each duct is referred to as a "base" and has a corresponding "lid."

My variation is based on the "multiple cables" size then increased by 3mm in height and width.
Included here are straight ducts of the larger size in 50, 100, and 200 mm lengths, each length with a no [side ]openings, 1 opening and 2 openings.
Matching lids are included for each of the lengths - no variation in lids for the opening variations.

Also, included are each of the connector ducts and matching lids in the new size.
Lastly, a size adapter and lid to adapt the larger size duct to the original "multiple cable" duct.

* I hesitate to even call this a remix. It's simply parameter variations with a bit of testing. The real work, and it is excellent work, along with the the credit due is all Leon.