Modern Candle Holder / Candelabra

This modern candle holder with sleek lines and clever modular design make it a standout piece in any room. Easy to print, even with a smaller 3D printer, and simple to assemble. 
With space for four standard 22mm candles, it's perfect for cozy evenings and romantic ambiance.

Fully assembled, the candle holder has a height of 34cm and a diameter of 29cm. The candles in the photos are LED candles with a height of 25cm and a diameter of approx. 22mm

Printing information

All STL files are correctly aligned.

Layer height: 0.20mm
Perimeter: 3
Infill: 20% *)
Support: none

*) If you - as I recommended - use 3 perimeters, the 'Arch' parts can be printed completely without infill. However, I still used 20% infill to give the candle holder more weight.

Another tip: Some parts tend to warp due to their shape, especially 'Arch large.' Therefore, make sure to thoroughly clean your print sheet before printing.
A recommendation for this: A few weeks ago, I bought 3DLAC. It doesn't cost much, is very productive, and works wonders. You spray a little on the print sheet, and challenging first layers and warping become a thing of the past.

Assembly instructions

The individual parts are each connected with a bit of super glue. Just follow the subsequent photos for guidance. The sequence has worked well for me.
Check if the parts fit well together before gluing. And don't be too impatient. Always allow the glue sufficient time to cure before attaching the next piece.

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.