May 9, 2024
Description
Kitchen Sink Strainer with detachable blades.
Easy Clean, Easy Print, and Easy Assembly!
After designing my other sink strainers, I wanted to design one with much easier way to clean, so I came up with this strainer.
Note: Designed for 40 mm kitchen sink opening, with 30 mm depth!
To Assemble:
Just hang the 12 Blades to the Holder, insert the Screw to the Holder (add a drop of oil), screw it until it holds the Blades in place, and it's ready.
To Disassemble and Clean:
Unscrew the Screw until you can detach the Blades from the Holder, clean, and re-assemble again.
Printing:
| File | Qty |
| Sink Strainer Blde.stl | 12 |
| Sink Strainer Holder.stl | 1 |
| Sink Strainer Screw.stl | 1 |
For easier print, a ready prepared print layout STL of all the parts is also provided.
My print settings:
Filament: PETG (Recommended)
Nozzle: 0.4 mm
Perimeters: 5 (Recommended)
Infill: 15%
No Support.
I hope you like and share your make.
Happy Printing =)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MrENG
