May 15, 2024
Description
I have done this modification to the file as most holders aren't compatible to the best version of nautilus, and ALL the holders for download that fits SV06 is in a bad side in my opinion and doesnt aim correctly to the nozzle, all the holders aims a little to the left, not ideal of course (you can see on one of the images how its designed for the endoscope camera to be pointed towards the nozzle.)
This remix will provide the best endoscope nozzle cam holder with one of the best designed ducts out there.
I recommend painting some supports to the areas indicated in green below to guarantee success:
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow.
CFD analysis included.
Version improvements:
- Aditional mounts on extruder
- optimised airflow
- reversed fasteners
Versions:
- Normal: **_**_Single (recomended Version)
- non reversed fasteners: **_**_Nonreversed
- without brace: **_**_No_Brace
Print with fine layers to improve the air flow. I used 0,15 mm.
Note: The screws are supposed to cut their own thread in the plastic.
Requiered hardware:
- 2x M3*8 countersunk
- 4x M3*20 countersunk
- 1x M3*18 (M3*20 allso works)
- 1x micro JST plug (1.25 SH) (if not allready on fan)
CAD Files (link to OnShape):
https://cad.onshape.com/documents/3cc09040b63e7a712399f35b/w/5c481255af6e38fa10860179/e/0e6747afb124cf175968dc55?renderMode=0&uiState=64cd2dd560715a071e3f5ca7
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Bolado
