November 3, 2019
Description
Simple feet for Prusa I3 Mk2 to reduce noise and prevent slipping on the support surface.
Can be used with or without the Prusa felt pads already on.
Must be printed in a flexible filament like Filaflex, NinjaFlex or similar (Hardness 92A - 98A) for optimal effect.
Print four pieces and slip on - no need to glue,
Feet on photos is printed in:
>> If you like it, please leave a rating, a like or maybe a donation :)
Layer: 0.20mm
Infill: 10%-20% Rectlinear
2 perimeters, 4 top and 3 bottom layers.
As with all flexible filaments, print slowly or use profile supplied by Prusa.
License:
Creative Commons — Attribution — Share Alike
7
Area51
