June 9, 2025
Description
Wall Mount for STIHL HSA 26
Prints without support. I printed it in ASA, which works fine. I would advise against PLA.
I've created a second version of Part 2 that is 22mm longer (+22). I used this because in my case the top part is mounted on a 22mm board.
I've created a wall mount for the second blade too: https://www.printables.com/de/model/410598-stihl-hsa-26-blade-wall-mount-cover
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
DrTob
