Prusa MK2.5/MK3 Filament Sensor Cover Upgrade

Sometimes the filament gets stuck when unloading - it can be difficult to get the stuck part out as you have to dismount the filament sensor cover.

I made the cover two part, a fixed part and a screw in part, holding the PTFE guide tube.

If the filament gets stuck, just unscrew the top tube holder and resolve.

The Festo version uses PC-4 M6 pass-through coupling - The PTFE tube will replace the short 13mm tube and works with MMU 2.0 giving better filament path.

For assembly reuse the kit parts and follow the photos.

>> If you like it, please leave a rating, a like or maybe a donation :)

Note: NOT FOR MK2.5S, MK3S/+ and MMU2S.

Print instructions

Shown model is printed in Devil Design Black PETG.