FlyingBear P902 to ZeroG Mercury One.1 (coreXY) 1.1.6

Stepper assembly (and original X joint) files now updated to the 1.1.6 version!

This is a coreXY mod for the old Flyingbear P902 based on the ZeroG Mercury One.1 (R1.1.5).

Most of the part are the same as the original design and you can find them in the official ZeroG page, the modified parts use the same printing settings as the original as well as the hardware.

You can use the original stepper motors for A/B and Z axis, is recomended to use a smaller stepper motor for the extruder (Im using nema 17 x 22mm and a BMG style extruder). Also you can modified the original endstops.

Custom BOM:

• MGN12H 300mm for Y axis (x2).
• MGN12H 320mm for X axis (x1).
• T8 screw 400mm for Z axis (x1 if you are using one z stepper).

Print Settings

Rafts:

No

Supports:

Resolution:

0.25 first layer then 0.2

Infill:

Filament: Any ABS/ASA

Category: 3D Printer Parts