IKEA Rallen Wireless Charging iPhone Xs / Xr / X / 8 / Samsung S9 Stand

I designed this neat stand in which you can mount the IKEA Rallen wireless charger.

Standard size: https://www.thingiverse.com/thing:3068268
NEW - XL Version: https://www.thingiverse.com/thing:3141797
Flat version: https://www.thingiverse.com/thing:3068295

You can place in your phone vertical or horizon, will charge both ways.

Tested with:

• iPhone 8
• iPhone X
• iPhone 6 and 7 (with aftermarket add-on)
• Samsung S8

• Samsung S9
  but should work with any phone not wider than 77.7mm (with case)
  How to use?

  1. Remove the outer plastic ring of the Rallen. This is not used. Keep the grey rubber ring on.
  2. Put the power cord trough the hole from the front
  3. Place the Rallen in the hole, firmly press it in. It is a really tight fit, like perfect!
     Demo video: https://youtu.be/jHZdIWfLOAk

  Also check out my other flat design: https://www.thingiverse.com/thing:3068295

  Fun fact, I designed this a month ago (July 2018) and in the meantime (week later) Logitech released a Wireless Charger which looks somewhat the same although most universal stands have this look ;)

Print instructions

Category: Mobile Phone Print Settings

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20%

Notes:

No supports needed

There is a small part (upper part of the ring) where it tends to 'drool' a bit but you can use a small knife or special tool to smoothen it. Supports would make it worse anyhow.