Prusa MMU 2 - Hanging Filament Guide

When I got my MMU2 by Prusa I looked at these cheap filament spool holders.. No way I'm going to implement those instead of hanging them. That why I made the Hanging Filament Spool holders in de first place right ;)

So, I remixed my own part in such a way you can use the Bowden tubes from Prusa on my Hanging Filament Spool Holders. I even use the new system which prevents filament from winding back/tangling around the spool.

Update November 25 2018

3/4 inch version added, the original is 22mm.

Main advantages

• Can be used in two ways, I currently prefer the bottom rollout method (see photo 3 and 4)
• You can still use the best filament spool holders in the world ;)
• Much easier to get filament in the tubes! (the original one really sucks.. :O )

• Way less space - Prusa advices to place the holders 40 cm away from the printer!
  Use them together with these: https://www.thingiverse.com/thing:2856675

  Here is the source of all MMU2 STL files: https://github.com/prusa3d/Original-Prusa-i3/tree/MMU2/STL (I added both levers (arms) in the files section anyway)

Print instructions

Unassociated tags: filament guide, hanging filament, multi material

Category: 3D Printer Accessories Print Settings

Resolution: 0.2

Infill: 40%

Notes:

Add the arms just like you would on the original part.