May 14, 2024
Description
No need for an AMS, Just change color at layer.
Both STL and Bambu Studio profile is uploaded.
Any of my 200 x 200 Frames can be used. Just glue them together.
These are the colors I used, not what the hueforge called for.
Light Grey - Bambu Matte Ash Grey
Dark Grey - Jayo Grey
Black - Elegoo Rapid Black Pla Plus
White - Elegoo PLA white
Please "Like", review, follow and upload make.
As of 2/25/24 my designs are no longer allowed to be sold commercially.
Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial Liscence is just $3 a month. A full commercial license for all of my designs is just $7 a month.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #14 (1.2mm) swap to Ash Gray
At layer #18 (1.52mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Dohara
