July 5, 2024
Description
Video:
These are my Dart Shaped Storage Containers, which have a screw-on lid to open up and put whatever you want inside!
These containers can be scaled to any size you want in your slicer. Hold anything from toothpicks to darts, even scale it up to be a trash can if you like! Just scale it up/down as needed.
I've found a good size to print these in is at 40% scale in your Slicer program. It'll make a nice display piece. For reference, at 40% scale, the short foam + an AFpro head will make a dart that is a hair bigger than a real MegaXL dart.
The parts are modular, so you can make any dart you want! Sticky/Suction Cup darts, Elites, Dart Zone and Adventure Force half darts, Bamboo darts, Worker darts, etc.
The parts are modular, so you can make any dart you want! Sticky/Suction Cup darts, Elites, Dart Zone and Adventure Force half darts, Bamboo darts, Worker darts, etc. You can also make cursed combos, like putting a Velcro Tagger head on an Ultra dart foam. The sky's the limit!
Here's a list of all the individual components you can mix/match.
I've found a good size to print these in is at 40% scale in your Slicer program. It'll make a nice display piece.
For reference, at 40% scale, the short foam + an AFpro head will make a dart that is a hair bigger than a real MegaXL dart.
I exported these in a larger size by default to preserve detail when people print them larger, for storing actual darts inside of.
Print at 5 Walls 20% infill. A brim is very helpful on most of these parts. Some of the dart heads need supports on unavoidable overhangs.
The bottom divots in the foam parts might need supports if you print bigger than 40% scale, or have poor bridging performance on your printer.
You can also make the foam portions look even better by enabling ‘Fuzzy Skin’ in your slicer to rough up the outer surfaces!
For the heads and other glued pieces, clamp or press them together while the glue dries. IF YOU USE SUPER GLUE, make sure to put the pieces in a place with direct airflow to prevent ugly white crap from forming around the glue seam while it dries.
If you print any of my designs, I'd love to see yours! Please consider leaving a Make on the Printables page, and leaving a review!
China: 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.
Disclaimer: These parts are NOT to be used as actual ammunition for any sort of projectile launcher, even if printed in a flexible or foaming filament. These ARE NOT safe to throw at people or other living creatures!
Thanks to Fade and DonutCat for letting me use their photos.
Changelog:
If you like what I do, please consider supporting me!
I don't charge for my files, so any donations or merch purchases would be greatly appreciated!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Sillybutts
