July 5, 2024
Description
Video:
This is my Giant Nerf Vortex Disc model, which can be used as a prop, decoration, or as a drink coaster!
This model can be scaled to any size you want in your slicer. I've found a good size to print this at is 50% scale in your Slicer program. It'll make a nice display piece! For reference, the photo below is of the disc at 50% scale.
However, if you want to use it as a drink coaster, you should probably print it at 75% scale.
I print the disc pieces at 5 walls 20% infill, just to give them a nice weight.
No supports needed, no brims needed.
Once the two parts are printed, you can put glue on the inside edge of the disc foam part, then press the disc core part in. Then clamp or press them together while the glue dries. IF YOU USE SUPER GLUE, make sure to put the pieces in a place with direct airflow to prevent ugly white crap from forming around the glue seam while it dries.
If you print any of my designs, I'd love to see yours! Please consider leaving a Make on the Printables page, and leaving a review!
China: 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.
Disclaimer: These parts are NOT to be used as actual ammunition for any sort of projectile launcher, even if printed in a flexible or foaming filament. These ARE NOT safe to throw at people or other living creatures!
Changelog:
If you like what I do, please consider supporting me!
I don't charge for my files, so any donations or merch purchases would be greatly appreciated!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Sillybutts
