Sometimes you need to write something and you don't have a pen, well TAKE A PILL THEN.
You can also print the KEYCHAIN BODY to make it a useful keychain!!
Super Easy Assembly steps:
1.
You will need a BIC pen and something to cut the ink cartridge, (if you use one that is almos empty it is better)
2.
Cut the ink to length.
You can add a little dab of silicone to end of the ink to prevent it from flowing out.
3.
Inset it into the INK HOLDER
Join the three sliding parts together as shown.
4.
Join the PEN BODY to the sliding parts (IT IS A SNAP FIT SO IT SHOULD CLICK IN)
5.
PUT THE CAP AND YOU ARE DONE, ENJOY YOUR PILL!!
(please do NOT try to swallow this)
Follow me on:
Instagram: https://www.instagram.com/afo3d/
TikTok: https://www.tiktok.com/@afo3d
Youtube: https://www.youtube.com/@AFO3D
Licensing
All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.
If you want to sell my designs you can subscribe to my printables membership.
Reccomended Print Settings:
Brim
0.4mm nozzle
Some parts require supports (PILL BODY, PILL CAP, KEYCHAIN CAP)
-AFO
AFO3D
