Tight PTFE Tube Clips - 2 to 8 Tubes - Original Prusa MMU3 Remix

I needed to align PTFE tubes in different quantities than the 5 of the original Prusa MMU3 clips.

On Printables I found the PTFE tube clips by @Samotrel, which were close to what I needed, but they don't tighten the tubes enough and they come off if they are under tension.

So, I decided to remix the original clips that are part of the MMU3 printable parts by @Prusa3D to support 2 to 8 PTFE tubes. They are narrow enough to hold the tubes even under tension. In general, they should work for any PTFE tube with 4mm OD.