PMN - 4 (Antipersonnel Landmine)

Currently very frequently used anti-personnel mine in Ukraine.

It consists of five parts. I printed from PLA and PETG. 
The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical bending.

The parts fit together nicely. For a more realistic look to the mine, use beige filament for the bottom and middle parts and black for the cap and ring.

The inner part is actually a pressure plate. It doesn't work on the principle of spring compression as with other mines, but like the PMN-2 mine, it works by having to deflect either edge sheet off axis.

I use organic supports. You will need a 3mm diameter cotter pin.

For personal use only.