Support to mount the IMX258 10x85mm webcam on the Original Prusa Enclosure

This is a support to mount the IMX258 10x85mm webcam to the Original Prusa Enclosure (OPE). Please note that there are other sizes of this camera on the market, but this model is only compatible with 10x85mm ones.

For example, I suggest the following item from AliExpress: 3840x2160 4K 12MP HD CMOS IMX258 Auto Focus 75 ° 30FPS.

Print settings:

Supports required only for the Box Ball Connector part.

Assembly instructions:

Screw the Box Ball Connector to the Box. The Ball Support screws to the enclosure with an M3 screw. The motherboard of the IMX258 webcam fits into the box and the lid is snap-in.

Finally, the Box is free to rotate on the Ball Support. If you can't hold the webcam in place, you can try slightly varying the size of the Box Ball Connector or Ball Support in the slicer, or apply some hot glue like I did.