Drain Cover

Drain Cover

The flip drain cover can easily get blocked with a light touch or by water flow. If you remove the flip cover, it often goes missing when you need it to block the drain. So, I made this flip cover drain filter.

I mainly considered two points for this filter:
The locking mechanism of the flip cover.
Ensuring the locking block does not break off and fall into the pipe.

Inner diameter is 61mm
Outer diameter is 65mm
Gap for the locking block is 11mm

I provide not only the STL file but also the STEP file to allow for modifications as needed.

Print using PETG material, no support needed.