SKOUT Epoch Bag Rider

Bag rider for the SKOUT Epoch which utilises 4 holes under the rear stock.

As with all 3D printed holes, much is depended on your printer/filament settings and how good your printer is tuned but there should be enough space for a ¼"-20 screw to pass though the holes no matter how low print quality is.

You will need 4 ¼"-20, 25mm (1") long screws

Whole setup is quite sturdy and stable

I've used PLA but for durability outside I would recommend ABS, ASA or PETG for higher temperature resistance in the sun.

Print in upright orientation with support from build plate only