RC FVP antenna mount at 90 degree angle

This antenna mount can be used on drones. It also functions as a battery brace so that the battery does not slide backwards during flight.

Print it at !00% infiltrated so that you can dril mounting holes according to your drone frame layout.

Print Settings

Rafts:

Doesn't Matter

Supports:

Resolution:

.2

Infill:

Notes:

Infill must be 100% if you want to drill mounting holes. otherwise 27% is fine.

Do not use PLA that is to brittle. I would recommend PETG or nGen.

Category: R/C Vehicles