PiCam case with movable arm bed carriage plate holder

Designed a bracket that could hold my Pi camera to the bed and lead the ribbon cable neatly inside. I designed a arm construction that could move the camera in every place and angle.

The case for the camera is a remix of some older design I found on the web. I changed it so that it had cooling for the IR-led's and made it esthetically more pleasing and functional.

In the pictures you also see a case for mt Raspberry Pi with touchscreen, this is the basic model from #Adafruit but i updated it so the ribbon cable woud come out of the bottom and had a protective piece over it. I also made 2 bracket holders that hold the case to the Wanhao i3 frame.(these models are not on thingiverse yet).

Notes:

I only used supports for the bracket piece. i did custom supports so that it would not make supports under need the opening for the ribbon cable. other then that there is no special instruction on how to print these.

You do need too have your setting nailed in that your bridging is up to par. ;)

Post-Printing

assemble everything with m3 nuts and 20mm bolts plus one that is 10-15mm for inside the rotating arm head.

Category: 3D Printer Accessories