May 17, 2024
Description
Model of the Elder Wand from the Harry Potter series. This is a 2-part wand which goes together without magnets or glue. The joint isn't noticeable.
The assembled wand is 15" / 38cm long.
.02mm layers
2 walls
15% Infill
The print profile has it angled as it should be printed both to fit the bed as well as support. I used tree supports. You may want to slow this down. I set most of the speeds to a max of 50mm/s. The initial layer and support are faster as they are printed before it gets too tall.
License:
Creative Commons — Attribution — Noncommercial
Jovan
