May 22, 2024
Description
Dinosaur Book Ends
Brachiosaurs and Stegosaurus book ends for every dinosaur enthusiast. Books not included.
Material: Bambu Basic PLA Gradient Ocean to Medow, Bambu PLA Basic Purple, Bambu PLA Basic Black, Bambu Support for PLA
Print recommendations (based on Bambu printer):
Bambu Lab X1 Carbon 0.4 nozzle
Textured plate
0.12mm High Quality layer height
2 walls
15% infill (Dinsoaurs); 10% infill (Book ends)
Travel Speed: 300 mm/s
Supports: See below
Brim: Outer and inner brim
Brachiosaurus and Stegosaurus specific - colour profile:
Book end part specific:
Supports: Yes. Supports required - Enable tree (auto) supports and set to “on build plate only” in the Bambu slicer.
Use tweezers to remove supports. All support contacts are in areas not typically visible when looking at eye level (e.g. the stomach of the stegosaurs) and do not affect the aesthetic of the model on a bookshelf however if scarring occurs from supports, sanding (400 grit) is an option to smooth out those areas. The use of PLA support material on the support interface reduces this issue significantly.
Post printing: Dinosaurs can be super-glued into the base or left removable.
Happy to take requests for other dinosaurs going forward.
How can you support our work?
If you like the model please follow and like. If you like our work, and want to support it, buy us a coffee at:
License:
Creative Commons — Attribution — Noncommercial
Lore In Layers
