NeoPixel LED Menorah

Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython. A push button allows you to light up a NeoPixel LED on each night of Hanukkah.

Learn Guide: https://learn.adafruit.com/neopixel-menorah/

This minimalistic design features parts that snap fit together and print without any supports. The assembly is modular and easy to put together.

The bulbs are 3d printed in translucent PLA and the NeoPixels are fitted inside the candle holders.

Code on GitHub
https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/NeoPixel_Menorah/code.py

Parts

QT Py RP2040
https://www.adafruit.com/product/4900

NeoPixel Button PCB
https://www.adafruit.com/product/4356

16mm Push Button
https://www.adafruit.com/product/1503

3-pin Cables
https://www.adafruit.com/product/4721

2-pin Cables
https://www.adafruit.com/product/4720

M2.5 Hardware Kit
https://www.adafruit.com/product/3299

USB-C Cable
https://www.adafruit.com/product/4696