Dwemer Gear - Remix

This is a remix of a Skyrim Dwemer Gear that I found on thingiverse. When looking at the ingame model, I noticed that it was double sided and thin. 

Printed the one in the images with Polymaker PLA+ Black at 0.2mm layer height, 10% infill with gyroid pattern. Overall filament used, including supports was around 140 grams and took around 15hrs.

In terms of post process;

• 80 grit sanding for the first round
• Initial filler used was,
• 2 layers of MTN Pro Grey filler primer
• 240 grit sanding before paint
• 1 coat of Rust-Oleum 2x Ultra Cover - Espresso Satin
  • Shout out to @SilverrendProps for the advise for both the Espresso Satin base colour followed by the below Antique Rub'n'buff
• Sponge on some Rub'n'buff Antique Gold to the desired effect
• Spray a coat of sealant