Darth Maul - Star Wars - keychain

Print time is more or less around 18m at 0.2 layer heigh (0.4 mm nozzle).

Dimension: 34.5 mm and 2.4 mm height

Print parameters:

• Layer height - 0.16 mm
• Perimeters - 3
• Infill - 10% is sufficient
• Brim - NO 
• Support - NO
• Raft - NO
• Filament type - PLA or any

Could be printed even in multicolor without MMU, AMS or similar.

For multicolor print:

Print at 0.2 layer height: put the printer in Color Change mode(G-code M600) at layer 9 and then change filament.

Tags