Laptop Stand

A simple and stable stand for any laptop. Tested on a 16-inch MacBook. The height lift is 4 cm, and in the folded position, it raises by 1.5 cm. Ideal for better typing ergonomics and viewing angle. 

The stand has integrated 2 magnets with a diameter of 6 mm and a height of 2 mm. The bottom edge has 0.8 mm deep cutouts for double-sided tape. I do not recommend sticking directly to the laptop chassis, ideally to a cover/protective film.

Dimensions: Height: 1.5 cm / Depth: 4.5 cm / Width: 24 cm

I personally used the excellent material Bambulab PLA-CF.

Layer Height: 0.16 mm

Number of Perimeters: 6 mm

Infill: 25%

Infill Pattern: 3D Honeycomb

Supports: Optional (not necessary)

Brim: Ideally, yes

Speeds: Depends on the printer

I remind you of the necessity to add 2 pauses in the gcode for inserting the magnets!