PMN - 3 (Antipersonnel Landmine)

This mine is a continuation of the PMN mine series.

It is similar in appearance to the PMN-2 mine.  The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a replacement for the PMN-2.

The mine is currently in use in the Russian-Ukrainian conflict.

The mine is a working dummy. The foot cross moves in the same range as the real mine. You will need a spring (length approx. 40 - 50 mm, outer width 22 - 27 mm, wire thickness up to 2 mm) 

To complete the real look, you can insert a cotter pin (max. cotter pin diameter 2 mm) and a piece of cloth through it.

Mine is almost impossible to find on the internet. The appearance of this mine is taken from only a few pictures and the rest is my creativity. Do not take the appearance of the mine as final. 

Organic supports; 0,4mm nozzle; layer height 0,2; Prusa MKIV; Filament NEBULA 1,75mm Army Green

For personal use only