Neptune 4 Pro - extended feet

I am in the process to teach my neptune some silence. For this I am going to change the PSU and electronic cooling fans against noctua fans. For the PSU I will use a “Noctua NF-A9x14 PWM” fan. To mount it and to provide enough room below the fan I was in need for different feets than the stock rubber feet. So I designed my own version.

The new height underneath the printer with these feet is 50 mm (excluding any rubber pads).
In the file there are two versions. One just flat and one with a 8 mm cavitiy for a rubber pad. I cut pieces from an old pad I had laying around here (anti-slip mat, 10mm thick, from shredded tyres). To mount them you can use the original screws.

my print settings:
- PLA+
- 0,3 mm layer height @ 0,4 nozzle
- 4 perimeters
- 8% gyroid infill
- solid layer: 4 top, 3 bot


Happy printing!