May 21, 2024
Description
As my fabric coaster pad was such a success, I have created another fabric object for you. This is a lovely very elegant looking fabric box. The side panels are exactly the material of the fabric coaster pad.
If you would like to check out the fabric coaster pad, this is the Thingiverse link:
https://www.thingiverse.com/thing:6546177
This object is for advanced 3D printer users. Be prepared for an epic print. Even with my delta printer, the print is a serious operation. If you do not have a well dialed in printer, you may want to print the four side panels one by one to avoid frustration when something goes wrong.
Print the two frame parts in any color you like.
Print the side panel four times in a contrasting color.
Side panel with cross pattern, no fabric pattern. This gives a more stable box and you can also put steel balls into it.
Enjoy printing this object.
Printer Brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm layer heigth
Infill:
20 %
Filament: Eco PLA PLA
Fabric box assembly part 1
Slide the four side panels into the bottom frame.
Fabric box assembly part 2
When the four side panels are in place, test fit the top frame. The pins serve as guides to help you positioning the top frame. It may a bit difficult to position the top frame.
Fabric box assembly part 3
Glue the top frame in place.
This object was designed with Blender.
Category: ContainersLicense:
Creative Commons — Attribution — Noncommercial
Dreamtime24
