Thumbstick Extensions (Xbox One and Switch)

Have you ever had an issue with hitting those precise FPS shots in a game because of overshooting? One reason could be because the controller doesn't have a long enough stick.  The longer the thumbstick, the higher the accuracy. The fingers that hold this extension on have been tightly dimensioned to increase the height 15mm (0.59 inch) and to prevent the modification from falling off during your struggle for victory. Happy Gaming!

There are 2 different prints here. One for the Xbox One and the other for the Switch. They might work for another type of controller other than these but I am unsure, nor do I have other consoles.

Originally I had a texture on the thumb but this failed due to bridging so I recommend that if you have issues with the stick slipping out of your grasp, dip/spray it with some rubber coating. Or maybe print a rubber cover? ;)

Please note: The gcode I use is actually in the .txt section. Both Gcode and Txt will work. The only difference is a clean nozzle pause in the txt. Unfortunately PrusaPrinters doesn't allow me to upload unless I comment out the pause.

There are 2 song segments in the program. Megalovania for nozzle tip cleaning  and Mario Coin for the End of Run