February 21, 2023
Description
RotaTable is a rotating platform for 3D scanning with Kinect, David3D, or Laser-Line-Scanners. It can also be used as a simple rotating display stand or adapted to be used for photogrammetry.
The Firmware for controlling the plate together with David 3D is available at https://github.com/fluetke/RotaTable
Feel free to improve and adjust it.
You might want to add a bit of grease to the ball bearing and a bit of foam to the interior to dampen the sound.
- 60x30x0.4cm sheet of poplar plywood
- 60x30x0.5cm sheet of MDF
- stepper motor
- stepper motor driver
- 12V/2A DC powersupply
- 40-42x10mm steel balls
- 20xM3 10mm screws
- 30xM3 16mm screws
- 60xM3 nuts
- 4xM2.5 25mm screws
- 4xM2.5 nuts
- 50x5mm steel rod
- can of black spraypaint
- fork-light-barrier sensor
- Arduino Uno (or other Arduino compatible microcontroller)
- rotary-encoder wth switch
- 16x2 LCD Display
- M3/M4 maggot screw
- 3x 10k Ohm Resistors
- switching transistor
- 3.5mm audio jack
- wiring, prototyping boards, etc.
If you enjoyed this print, please give it a like, also: Feel free to buy me a coffee using the Donate-button next to my username on the top of the page. ;-)
License:
Creative Commons — Attribution — Share Alike
9
fluetke
