Ion's Desk Fan Stand - inspired by Noctua

This is my version of the desk fan stand Noctua posted on Twitter the other day.

Update 27.05.2024: The box for on/off switch and 5.5mm 12V barrel connector is published.
https://www.printables.com/model/893345-on-switch-box-for-ions-desk-fan-stand

The base took about 50 minutes to complete, but the fine tuning took more time. I made the stand very similar to Noctua. With holes for zip ties and screws. Under the bracket you can use M3x8 countersick screws to mount Ø12mm neodymium magnets with countersink holes.
In the 2nd image, the fan is mounted on my freezer which has a magnetic alloy frame.



I made the duct as well. You can scroll to my designs or click here.
Its only for 120mm fans - I might make another one for 140mm fans later.
https://www.printables.com/model/878001-noctua-desk-fan-directional-duct

Noctua's post
https://twitter.com/Noctua_at/status/1792840619011830121

Update 13.08.2024:
Changed names of some of the files. It was horrible. I feel it is easier to to read and find correct file now.
 
Update 07.01.2025
I got a make from one who mentioned it was tipping over. So I made a few wider bases for those who use heavier fans or ducts. Also made them in a few different versions without all the mounting holes if you ONLY want to have it on your desk forever. That ugly logo with name is gone on all if the original base bracket. The old file is still there if you want to print it.