Adjustable Curve Sketcher

Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator:

Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry no more, with this handy curve guide you can set the curve beforehand, hold it on the paper and follow the guide with ease!

The guide is flexible, so press down on the spine AND curve and try to follow the guide gently (don't push too hard into it like you would with a ruler). The guide prints in an hour, uses less than 10m of filament and the comb conveniently stores into the guide itself.

The curve is designed to have a variable radius, with the tightest radius at the base and the straightest curve at the comb side. You can use the guide upside down to invert the tight radius side of the curve. 

This model is designed to print without brim. With a brim it will be hard to clean up the mess (see  the 2 star review :( ) . So make sure you have good bad adhesion and leveling and you are ready to go! You have to break or cut out the connecting tab which is there to improve printability without a brim

Happy printing and happy sketching!

Oh and don't forget to follow me if you like my other designs :)