November 27, 2021
Description
This print enables you to add additional bits to the Wera Kraftform Kompakt 60 (KK60) set. As delivered, the kit only contains one slot bit but I wanted to expand it to have more. So I designed this part which adds provision for 8 more bits. It is designed to clip onto the elastic in the middle section - see photos.
As well as the print, you will need to supply a length of elastic 25mm wide, 1mm thick and about 140mm long. I would suggest that you seal the cut ends using heat - I used a hot air soldering gun.
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.150mm layer height
Infill:
15%
License:
Creative Commons — Attribution — Noncommercial
9
Wilts01
