Planter #2 - Kumiko Hemp Leaf using a split design, multi-material (AMS)

Planter with a simple split design for multi-material printing and 2 holder plates.

Two different filaments are used, a Marble PLA and a black PLA.

Two different patterns for the upper part of the pots are used:

          1- Kumiko Hemp Leaf

          2- Angled slash

Two different Plates/bases are provided:

         1- Rectangular double base

         2- Circular single base.

Planters with drainage as well as non-drainage designs  are provided.

The pots have been tested with water over a 24 hr. period and did not leak,  but these are PLA so will eventually swell and/or leak over extended usage. An epoxy or other sealant would not be a bad idea.

The planters are 80 mm height x  90 Width. 

With the base, 85 mm height with a 200mm wide base.
 

No supports required.

The slicer settings for the base(s) and planters themselves: 

     Sunlu PLA+ Marble

     Eryone PLA Matte Black

The slicer settings for the plater/pots and circular base:

.20 mm Strength 
Infill %  - 100 , Rect
Wall Loops - 8
Top Shell - 8
Bottom Shell - 8
 Seam: Random

The slicer settings for the rectangular base:

.20 mm Strength
Infill %  - 100 , Rect
Wall Loops - 8
Top Shell - 8
Bottom Shell - 8
 Seam: Aligned