Power supply box

This is a 3D printed box for power supply, with two low voltage circular connector, and one entrance for high voltage.

If you are interested in a upper part with another writing on it, let me know :)

BOM:

• 2 DC Connectors (https://a.aliexpress.com/_Ew3sU6n),
• 1 high voltage connector (https://a.aliexpress.com/_EynM1Cr)
• 4 M3x4mm heat threaded insert (for close the top),
• 4 M3 screws,
• 2 M4 screws,
• 2 M4x4mm heat threaded insert (for attach the high volatge connector),
• Power supply 12V (but you can use a different one),
• Cables,
• 4 M4 screws to attach it to the wall.