Segway Navimow i-series AirTag holder

The Segway Navimow robot mower has a compartment that is intended for their Navimow Access+ 4G Module cellular theft-tracking tracking accessory that is $150 USD and that doesn't even include the cellular fee you have to pay after the first year. (As a side note, it's somewhat silly to steal one of these mowers as they have a built-in alarm, they are locked to the owner's account and will be a brick to anyone else, and I'm not sure why anyone would even want the parts?)

Several owners have had the idea of using a $29 USD Apple AirTag instead, but something needs to hold it in place so it doesn't rattle around and get damaged over time. 

This part is designed to accomplish a few things:

• Hold the AirTag tightly so it doesn't move AT ALL inside the mower

• Hide the AirTag entirely so it's not obvious it's there

• Enable tracking that has it's self-contained power source (unlike the Access Module!)

• Fit tightly inside the mower compartment so it requires at least a basic tool to remove it

• Look sort of like it's part of the mower (to those who are not super familiar with them)

To use:

1. Print both parts, preferably in ABS or other temperature resistant material. 

   • NOTE: I've only tested this in ABS with a 0.6 nozzle. The screw threads may be tighter/looser with other materials/nozzles!

2. Insert AirTag

3. Screw on the cover using a screwdriver or coin

4. Remove the screws and open the compartment on the bottom of your i-series mower

5. Push in the holder

6. Route the cable around it

7. Put the cover back on and secure it with the screws

I also sell these here if you don't have a printer.

I've included a STEP file so you can easily edit in your own CAD software.