HueForge Gengar Red Splatter

Designed for 0.4 nozzles.

Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

The Model is 150x200.62mm in size
You may print at higher layer heights below the Min Depth of 0.5mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filament swap instructions:

1. Start with black/black adjacent
2. At layer 5 (0.6mm) swap to white
3. At layer 12 (1.3mm) swap to red to finish print

Actual filaments used in photographed print: CookieCad PLA Dark Magic; Overture PLA Matte White; PLA+ Sunlu Red

Image sourced from emojisky.com with non-commercial license