FX Dreamline Single Shot Magazine Left Side Feeding

This is a single shot magazine for the FX Dreamline that allows you to load the pellets from the left side.

It works really good if you are right handed and have a pistol grip on your Dreamline. Keep your hand on the grip, cock with left, tilt gun slightly to the right, drop pellet into the magazine, load the pellet and you are ready.

This takes a few seconds with practice and feels really smooth.

The magazine is secured in place by the same size O-ring used in the FX Dreamline magazine. Anyone know the correct size specification?

I only have a 4,5mm / .177 and a 7,62mm / .30 FX Dreamline. The 5,5mm / .22 fileshould work but has not been tested.

I recommend to print this with small layers for a smooth pellet travel. I am using 0.1mm layer height with 15% infill. Works fine in PLA but I will print a PETG version for outdoor use.

Update: 16.08.2021 - o-ring pocket is 0,1mm deeper now
Update: 29.08.2021 - added "tighter fit" versions with pocket 0,1mm shallower. The original version is starting to move a bit.
Update: 27.03.2024 - added 7,62mm version

Category: Sport & Outdoors