FX Dreamline Picatinny / Weaver Rail Adapter Mount

This is a Picatinny / Weaver Rail adapter for an FX Dreamline with the standard air tube.

The adapter requires an M3x25mm bolt and M3 locking nut. I also recommend that you spray the inside of the clamp part with a rubber spray paint. This prevents the clamp from twisting as hard plastic does not grip onto a round aluminum tube very well .

Print the picatinny rail section with support

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.20mm

Infill:

Filament:
Das Fillament Refill Spool PLA

Category: Sport & Outdoors