Based on this model: https://www.printables.com/model/393447-monitor-riser-shelf-legs
I took the idea from the original model and rebuilt it from scratch to fit my needs.
- Made it more lightweight (31grams per leg).
- 4mm thick sides
- Top part fits 18mm thick laminated MDF board.
- There are more holes cut in sides to spare some material and make it look better.
- Added countersink holes matching wood screw 3,5x20mm
- Shelf height (desk to bottom side of shelf) is 112 mm which is enough space to fit SFF PC under the shelf
Printing Instructions:
- Print without support or bed adhesion
- 0.4mm nozzle, 0.2mm layer height
- Three top and bottom layers
- Three perimeters
- Infill 15%
Assemling instructions:
- Print four legs - two normal, and two mirrored
- Attach each leg to the corner of suitable 18mm thick laminated MDF board by two wood screws 3,5x20mm
Martin Šlefr
