Universal filament cleaner - special versions

These will be variations of my original filament cleaner.

Available at the link:

https://www.printables.com/pl/model/759967-filament-cleaner

Modifications at the request of the community.

For the modifications I used, model version 0.3 hinge clearance.

Here I will only publish models and their virtual photos. I do not plan to print these modifications because I am using the basic model successfully.

 I ask those who print these versions for feedback in the form of a photo and a comment.

*************************************************************************************

Versions:

*************************************************************************************

Date 02.12.2024

At the request of @Jread002_2468953 I have added further versions of my cleaner:

type3v0_1, type3v1_1, type3v2_1

These are modified versions of type3v0, type3v2 as advised by @Jread002_2468953.

In addition, I have added further variations of the version 
type3 as:
type3v0_2, type3v1_2, type3v2_2
In which the ptfe tubes can be fixed with an additional cable tie with a maximum width of 3.5 mm.

*************************************************************************************

Date 14.06.2024

5. Type_4 (version: 1)- 

I have added another version - this is the basic version with the mounting bracket for an M3 screwfor an M3 screw in a plane parallel to the plane of the cleaner.

4. Type_3 (version: 1a and 1b)- 

I added another version with holders for 4 mm PTFE tubes. Version "a "with the mounting bracket for an M3 screw in the plane parallel to the plane of the cleaner, version "b" in the plane perpendicular to the plane of the cleaner.

*************************************************************************************

Date 28.05.2024

3. Type_3 (version: 0,1,2)- 

I have added another version with holders for 4mm PTFE tubing. These are three versions with handles in different locations.

2. Type_2 (version0)- 

I have added another version with an M3 screw. The same M3 screw is used to simultaneously close the cleaner and attach it to some part of the printer or filament holder .
This is a non-symmetrical version, if you need the reverse - print a mirror image.
To make it easier to print, the screw hole has a layer to make it easier to print bridges. Once printed, pierce the holes with a 3mm drill bit.

*************************************************************************************

Date 28.05.2024

3. Type_2 (version: 0,1,2)- 

I have added another version with holders for 4mm PTFE tubing. These are three versions with handles in different locations.

2. Type_2 (version0)- 

I have added another version with an M3 screw. The same M3 screw is used to simultaneously close the cleaner and attach it to some part of the printer or filament holder .
This is a non-symmetrical version, if you need the reverse - print a mirror image.
To make it easier to print, the screw hole has a layer to make it easier to print bridges. Once printed, pierce the holes with a 3mm drill bit.

*************************************************************************************

Date 27.05.2024
1. Type_1 (version0 and v1)- 

At the request of @BradleyM1_171049, I have added a version with an M3 bolt along with a place for the nut.
This is a non-symmetrical version, meaning you can fit the nut on one part if you need the reverse - print a mirror image.
To make it easier to print, the screw holes have layers to make it easier to print the bridges. Once printed, pierce the holes with a 3mm drill bit.